LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Component Locations & Component Connector End Views) >> Component Connector End Views >> Camshaft Position (CMP) Sensor Bank 2 Intake (LY7)

Camshaft Position (CMP) Sensor Bank 2 Intake (LY7)

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Camshaft Position (CMP) Sensor Bank 2 Intake (LY7) Connector End View
GM1331443Courtesy of GENERAL MOTORS CORP.
Camshaft Position (CMP) Sensor Bank 2 Intake (LY7)

Pin Wire Circuit Function
1 0.5 TN 470 Low Reference
2 0.5 YE 5276 CMP Sensor Signal Intake Bank 2
3 0.5 GY 705 5-Volt Reference 2
Connector Part Information 
  • OEM: 1928403966
  • Service: 88988583
  • Description: 3-Way F (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit