Camshaft Position (CMP) Sensor Bank 1 Intake (LY7)
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Camshaft Position (CMP) Sensor Bank 1 Intake (LY7)
| Pin | Wire | Circuit | Function |
|---|---|---|---|
| 1 | 0.5 TN | 470 | Low Reference |
| 2 | 0.5 OG | 5275 | CMP Sensor Signal Intake Bank 1 |
| 3 | 0.5 GY | 705 | 5-Volt Reference 2 |
Connector Part Information
|
Terminal Part Information
|