LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Component Locations & Component Connector End Views) >> Component Connector End Views >> Camshaft Position (CMP) Sensor (L26)

Camshaft Position (CMP) Sensor (L26)

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Camshaft Position (CMP) Sensor (L26) Connector End View
GM1526379Courtesy of GENERAL MOTORS CORP.
Camshaft Position (CMP) Sensor (L26)

Pin Wire Circuit Function
A 0.8 BN/WH 633 CMP Sensor Signal
B 0.8 BK/WH 836 Low Reference
C 0.8 WH/BK 644 12-Volt Reference
Connector Part Information 
  • OEM: 12162279
  • Service: 12126476
  • Description: 3-Way F Metri-Pack 150.2 Series, Pull To Seat (GY)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
scientia non olet · About LEMON Manuals