LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Component Locations & Component Connector End Views) >> Component Connector End Views >> Brake Pedal Position Sensor

Brake Pedal Position Sensor

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Brake Pedal Position Sensor Connector End View
GM1243663Courtesy of GENERAL MOTORS CORP.
Brake Pedal Position Sensor

Pin Wire Circuit Function
A 0.35 GY 598 10-Volt Reference
B 0.35 L-GN 526 Stop Lamp Switch Signal
C 0.35 BK 552 Low Reference
Connector Part Information 
  • OEM: 15332132
  • Service: 88953364
  • Description: 3-Way F GT 150 Series (BK)
Terminal Part Information 
  • Terminal/Tray: 12191812/19
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 15315247/J-35616-2A (GY)