Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the left tire and wheel assembly.
Remove left inner splash shield.
Position a transmission jack under the transaxle.

Fig 1: View Of Transmission/Transaxle Mount

Courtesy of GENERAL MOTORS CORP.

Remove the transaxle mount upper nuts from the transaxle bracket.
Carefully raise the transaxle assembly.

Fig 2: Identifying Transaxle Mount

Courtesy of GENERAL MOTORS CORP.

Remove the transaxle mount lower nuts from the frame.
Remove the transaxle mount from the frame.