LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Automatic Transaxle - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - On Vehicle >> Torque Converter Clutch Solenoid Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of TCC Solenoid & Components
    GM12957Courtesy of GENERAL MOTORS CORP.
  1. Install the TCC solenoid (315).
  2. Install the TCC solenoid retaining clip (314).
  3. Connect the TCC solenoid electrical connector.
  4. Install the case side cover. Refer to Control Valve Body Cover Replacement .
    5. IMPORTANT: It is recommended that transmission adaptive pressure (TAP) information be reset. Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to relearn TAP values. Transmission performance may be affected as new TAP values are learned.
  5. Reset the TAP values. Refer to Transmission Adaptive Functions .
scientia non olet · About LEMON Manuals