LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Automatic Transaxle - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - On Vehicle >> Accumulator and 2-1 Manual Servo Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the filter. Refer to Automatic Transmission Fluid Filter and Seal Replacement .
    3. Fig 1: Identifying Accumulator & Manual 2-1 Band Servo Cover Bolts
    GM164809Courtesy of GENERAL MOTORS CORP.
  3. Remove the accumulator bolts (131).
  4. Remove the manual 2-1 band servo cover bolts (103).
    5. Fig 2: View Of Accumulator Assembly
    GM97365Courtesy of GENERAL MOTORS CORP.
  5. Remove the accumulator assembly.
    6. Fig 3: View Of Manual 2-1 Band Servo
    GM164811Courtesy of GENERAL MOTORS CORP.
  6. Remove the manual 2-1 band servo (106-116).
scientia non olet · About LEMON Manuals