LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Automatic Transaxle - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - On Vehicle >> 1-2 Shift Solenoid Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying 1-2 Shift Solenoid
    GM49377Courtesy of GENERAL MOTORS CORP.
  1. Install the 1-2 shift solenoid (315A).
  2. Install the 1-2 shift solenoid retaining clip (314D).
  3. Connect the 1-2 shift solenoid electrical connector.
  4. Install the case side cover. Refer to Control Valve Body Cover Replacement .
scientia non olet · About LEMON Manuals