LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Automatic Transaxle - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Vehicle Speed Sensor Reluctor Wheel Assemble (FWD Only)

Vehicle Speed Sensor Reluctor Wheel Assemble (FWD Only)

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Vehicle Speed Sensor Reluctor Wheel (FWD Only)
    GM10605Courtesy of GENERAL MOTORS CORP.
  1. Warm the vehicle speed sensor reluctor wheel before installation
  2. Use a plastic mallet in order to install the vehicle speed sensor reluctor wheel (713) onto the differential carrier housing. Tap evenly around the reluctor wheel with the mallet until fully seated.
scientia non olet · About LEMON Manuals