Transmission Holding Fixture Disassemble
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Tools Required
- J 28664-B Transmission Holding Fixture. See Special Tools .
- J 3289-20 Holding Fixture Base
- J 44465 Holding Fixture Adapter. See Special Tools .
- Remove the pin from J 3289-20 .
- Remove the transmission and J 28664-B from J 3289-20 . See Special Tools .
- Remove J 28664-B from the transmission. See Special Tools .
- Remove J 44465 from J 28664-B . See Special Tools .