LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Automatic Transaxle - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Reaction Sun Gear and Manual 2-1 Band Removal

Reaction Sun Gear and Manual 2-1 Band Removal

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Reaction Sun Gear Assembly & Thrust Bearing
    GM893324Courtesy of GENERAL MOTORS CORP.
  1. Remove the thrust bearing (676) from the reaction sun gear.
  2. Remove the reaction sun gear assembly (678).
    3. Fig 2: View Of Manual 2-1 Band Assembly
    GM893326Courtesy of GENERAL MOTORS CORP.
  3. Tilt the band in order to disengage the manual 2-1 band assembly (680) from the anchor pin. Remove the manual 2-1 band assembly from the case.
scientia non olet · About LEMON Manuals