LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Automatic Transaxle - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Input and Reaction Carrier Removal

Input and Reaction Carrier Removal

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Input Carrier Assembly
    GM893323Courtesy of GENERAL MOTORS CORP.
  1. Position the transmission so that the case cover joint is facing upward.
  2. Remove the input carrier assembly (672).
    3. Fig 2: View Of Reaction Carrier Lube Dam, Thrust Bearing & Reaction Carrier Assembly
    GM1833142Courtesy of GENERAL MOTORS CORP.
  3. Remove the input carrier, reaction carrier lube dam (673). The dam may be stuck to the input carrier assembly.
  4. Remove the thrust bearing (674) from the reaction carrier.
  5. Remove the reaction carrier assembly (675).
scientia non olet · About LEMON Manuals