LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Automatic Transaxle - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Input and 3rd Clutch Pawl Functional Check

Input and 3rd Clutch Pawl Functional Check

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Input & Third Clutch Pawl Components
    GM1742376Courtesy of GENERAL MOTORS CORP.
  1. Hold the input sun gear (668) stationary in the position shown.
  2. The third clutch pawl outer race (727) should rotate only in the direction shown by the arrow and not in the opposite direction.
  3. The input clutch pawl assembly (728) should rotate only in the direction shown by the arrow and not in the opposite direction.