Input and 3rd Clutch Pawl Disassemble

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Sprag Clutch Assembly

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: The third and input clutch pawl assemblies (727, 728) are serviced as assemblies, do not disassemble.

Disassemble the third and input clutch pawl assemblies (727, 728) and input Sungari shaft (668) from the input clutch housing assembly (632).