Input and 3rd Clutch Functional Air Check

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Fluid Passages

Courtesy of GENERAL MOTORS CORP.

NOTE: Do not exceed the recommended amount of air pressure or it may damage or cause seals to roll.

Use a rubber tipped air nozzle in order to apply a maximum 138 kPa (20 psi) at each indicated fluid passage.
Listen for the following:
- The third clutch (1) assembly to apply
- The input clutch (2) assembly to apply