Input Clutch Housing, Input Clutch Pawl, and 3rd Clutch Pawl Assemble
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Use a small screwdriver in order to align the teeth of the input clutch plate assembly and the third clutch plate assembly. This will ease installation of the clutch pawl assembly.
- Insert the combined input clutch pawl (728), third clutch pawl (727) and input sun gear (668) assembly into the input clutch housing assembly (632).
IMPORTANT:
Make sure that the clutch pawl assembly is fully seated into the housing.