Driven Sprocket Support Bearing Disassemble

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 34129 Bearing Remover. See Special Tools .
J 8092 Driver Handle

Fig 1: Removing Driven Sprocket Support Bearing Assembly

Courtesy of GENERAL MOTORS CORP.

Use J 34129 , J 8092 and a hammer in order to remove the driven sprocket support bearing assembly from the driven sprocket support assembly (609).