LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Automatic Transaxle - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Control Valve Body Cover and Gasket Disassemble

Control Valve Body Cover and Gasket Disassemble

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Control Valve Body Cover Bolts
    GM840836Courtesy of GENERAL MOTORS CORP.
  1. Position the transaxle so that the control valve body cover (53) is facing up.
  2. Remove the 17 control valve body cover bolts:
    • 9 flanged bolts (56)
    • 4 TORX bolts (57)
    • 4 stud bolts (58)
  3. Remove the cover (53), outer gasket (54) and inner gasket (59).
scientia non olet · About LEMON Manuals