LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Automatic Transaxle - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> 1-2 Support Roller Clutch Functional Check

1-2 Support Roller Clutch Functional Check

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying 1-2 Support Drum Assembly
    GM10615Courtesy of GENERAL MOTORS CORP.
  1. Position the 1-2 support drum assembly (687) on the bench as shown.
  2. Install the reaction sun gear assembly (678) into the 1-2 support drum (687).
  3. Rotate the components as indicated by the arrows:
    • The roller clutch should move freely in the indicated directions
    • The roller clutch should lock in the direction opposite of that indicated
  4. If the roller clutch does not function as described, reassemble the clutch correctly, or replace the assembly.
scientia non olet · About LEMON Manuals