LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Automatic Transaxle - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Diagnostic Information And Procedures >> Harsh Torque Converter Clutch Apply or Release

Harsh Torque Converter Clutch Apply or Release

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Harsh TCC Apply or Release

Checks Cause
DEFINITION: An unacceptably quick TCC apply or release occurs in third or fourth gear, Drive or Manual third range, with the throttle held steady.
Control Valve Body Assembly
  • The TCC regulator apply valve (327) is stuck or binding.
  • The TCC regulator apply valve spring (326) is missing or damaged.
  • The TCC control valve spring (336) is missing or damaged.
  • The control valve body spacer plate gaskets assembly (396) are misassembled or contain incorrect parts.
  • TCC PWM Solenoid faulty.
scientia non olet · About LEMON Manuals