Causes of Burned Clutch Plates

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

The following conditions can result in a burned clutch plate:

Incorrect usage of clutch or apply plates
Engine coolant or water in the transmission fluid
A cracked clutch piston
Damaged or missing seals
Low line pressure
Valve body conditions
- The valve body face is not flat.
- Porosity is between channels.
- The valve bushing clips are improperly installed.
- The checkballs are misplaced.
The Teflon® seal rings are worn or damaged.