LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Power Steering System) >> Repair Instructions >> Power Steering Cooler Pipe/Hose Replacement (L26) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drive belt. Refer to Drive Belt Replacement (L26) .
  2. Place a drain pans under the vehicle as needed.
  3. Remove the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
    4. Fig 1: View Of Power Steering Hoses
    GM294335Courtesy of GENERAL MOTORS CORP.
  4. Remove the power steering cooler hose from the steering gear.
    5. Fig 2: View Of Cooler Pipe/Hose
    GM284303Courtesy of GENERAL MOTORS CORP.
  5. Remove the power steering cooler hose from the power steering pump.
  6. Unclip the power steering cooler hose from any front frame retainers as needed.
  7. Remove the power steering cooler hose from the vehicle.
scientia non olet · About LEMON Manuals