Special Tools

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Illustration	Tool Number/Description
Courtesy of GENERAL MOTORS CORP.	J 6627-A Tie Rod Puller
Courtesy of GENERAL MOTORS CORP.	J 21474-01 Control Arm Bushing Set
Courtesy of GENERAL MOTORS CORP.	J 21474-2 Bushing Installer Remover
Courtesy of GENERAL MOTORS CORP.	J 21474-4 1/2 Inch Nut
Courtesy of GENERAL MOTORS CORP.	J 21474-5 Bushing Receiver
Courtesy of GENERAL MOTORS CORP.	J 21474-13 Control Arm Bushing Installer
Courtesy of GENERAL MOTORS CORP.	J 21474-27 1/2 Inch Puller Bolt Thrust Bearing
Courtesy of GENERAL MOTORS CORP.	J 23444-A Extreme Press Lubricant - 1/4 Ounce Tube
Courtesy of GENERAL MOTORS CORP.	J 34126 Sprocket Support Bearing Installer
Courtesy of GENERAL MOTORS CORP.	J 35379 Front Knuckle Support
Courtesy of GENERAL MOTORS CORP.	J 41820 Ball Joint Separator
Courtesy of GENERAL MOTORS CORP.	J 42129 Wheel Hub Remover
Courtesy of GENERAL MOTORS CORP.	J 42991 Strut Rod Nut Socket
Courtesy of GENERAL MOTORS CORP.	J 45400 Strut Spring Compressor