LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Insulator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Left & Right Side Stabilizer Shaft Insulators
    GM1208424Courtesy of GENERAL MOTORS CORP.
  1. Install the left and right side stabilizer shaft insulators to the stabilizer shaft.
  2. Fig 2: Identifying Left & Right Side Stabilizer Shaft Insulator Clamp Bolts
    GM1208422Courtesy of GENERAL MOTORS CORP.
  3. Install the left and right side stabilizer shaft insulator clamps.
  4. NOTE: Refer to Fastener Notice .
  5. Install the left and right side stabilizer shaft insulator clamp bolts.

    Tighten:  Tighten the bolts to 42 N.m (31 lb ft).

  6. Lower the vehicle.