Valve Rocker Arm Cover Removal - Right Side
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the spark plug wires (724).
- Remove the ignition coil bracket studs (720).
- Remove the ignition coil and bracket assembly (719).
- Disconnect the ignition coil electrical connectors.
- Remove the bolts (723), coils (722), and wire harness (721) from the bracket, as required.
- Remove the valve rocker arm cover bolts and cover.
- Remove the gasket (504) from the cover.