Engine Coolant Air Bleed Pipe and Hole Cover Removal

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Coolant Air Bleed Pipe & Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the engine coolant air bleed pipe bolts (309).
Remove the pipe (307) with hose and seals (308).

Fig 2: View Of Coolant Air Bleed Pipe & Clamp

Courtesy of GENERAL MOTORS CORP.

Remove the hose (311) and clamps (322) from the pipe (307), as required.

Fig 3: View Of Engine Coolant Air Bleed Cover, Bolts & Gaskets

Courtesy of GENERAL MOTORS CORP.

Remove the engine coolant air bleed cover bolts (312).
Remove the covers (313) with seals (308).

Fig 4: View Of Coolant Air Bleed Pipe Seal

Courtesy of GENERAL MOTORS CORP.

Remove the seals (308) from the pipe and covers.
Discard the seals.