LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Mechanical - 3.6L (2 Of 5)) >> On-Vehicle Repair Information (1 Of 2) >> Valve Rocker Arm Replacement - Right Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the applicable camshaft(s). Refer to Camshaft Replacement - Left Side .
    2. Fig 1: View Of Valve Rocker Arms
    GM902907Courtesy of GENERAL MOTORS CORP.
  2. Remove the rocker arms. Refer to Valve Rocker Arm Removal - Right Side .
  3. Clean and inspect the camshaft(s) and the rocker arm(s). Repair or replace as necessary. Refer to Camshaft Cleaning and Inspection and Valve Lifters Cleaning and Inspection .
scientia non olet · About LEMON Manuals