LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Mechanical - 3.6L (2 Of 5)) >> On-Vehicle Repair Information (1 Of 2) >> Valve Lifter Replacement - Left Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Stationary Hydraulic Lash Adjuster (SHLA)
    GM946248Courtesy of GENERAL MOTORS CORP.
  1. Install the lifters. Refer to Valve Lifter Installation - Left Side .
  2. Install the rocker arms. Refer to Valve Rocker Arm Installation - Left Side .
  3. Install the applicable camshaft(s). Refer to Camshaft Replacement - Left Side .