LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Mechanical - 3.6L (2 Of 5)) >> On-Vehicle Repair Information (1 Of 2) >> Primary Camshaft Drive Chain and Sprockets Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine front cover. Refer to Engine Front Cover Replacement .
  2. Remove the right bank secondary camshaft drive chain tensioner. Refer to Secondary Camshaft Drive Chain Tensioner Removal - Right Side (Fourth Design) .
  3. Remove the right bank secondary camshaft drive chain shoe. Refer to Secondary Camshaft Drive Chain Shoe Removal - Right Side (Fourth Design) .
  4. Remove the right bank secondary camshaft drive chain guide. Refer to Secondary Camshaft Drive Chain Guide Removal - Right Side (Fourth Design) .
  5. Remove the right bank secondary camshaft drive chain. Refer to Secondary Camshaft Drive Chain Removal - Right Side (Fourth Design) .
  6. Remove the primary camshaft drive chain tensioner. Refer to Primary Camshaft Drive Chain Tensioner Removal (Fourth Design) .
  7. Remove the primary camshaft drive chain upper guide. Primary Camshaft Drive Chain Guide Removal - Upper (Fourth Design) .
    8. Fig 1: View Of Primary Camshaft Timing Chain
    GM902843Courtesy of GENERAL MOTORS CORP.
  8. Remove the primary camshaft timing chain. Refer to Secondary Camshaft Drive Chain Removal - Right Side (Fourth Design) .
scientia non olet · About LEMON Manuals