LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Mechanical - 3.6L (2 Of 5)) >> On-Vehicle Repair Information (1 Of 2) >> Primary Camshaft Drive Chain Guide Replacement - Lower >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Primary Camshaft Drive Chain Lower Guide Bolts
    GM1579007Courtesy of GENERAL MOTORS CORP.
  1. Position the primary camshaft drive chain lower guide to the oil pump.
  2. NOTE: Refer to Fastener Notice .
  3. Install the primary camshaft drive chain lower guide bolts.

    Tighten:  Tighten the primary camshaft drive chain lower guide bolts to 23 N.m (17 lb ft).

  4. Install the primary camshaft drive chain tensioner. Refer to Primary Camshaft Drive Chain Tensioner Replacement .