LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Mechanical - 3.6L (2 Of 5)) >> On-Vehicle Repair Information (1 Of 2) >> Crankshaft Front Oil Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Crankshaft Front Oil Seal
    GM1210996Courtesy of GENERAL MOTORS CORP.
  1. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
  2. UseJ 45000  in order to remove the crankshaft oil seal. See Special Tools .
scientia non olet · About LEMON Manuals