LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Mechanical - 3.6L (2 Of 5)) >> On-Vehicle Repair Information (1 Of 2) >> Camshaft Position Actuator Replacement - Bank 1 (Right Side) Intake >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Intake Camshaft Position Actuator Bolt
    GM1858800Courtesy of GENERAL MOTORS CORP.
  1. Remove the right exhaust camshaft actuator. Refer to Camshaft Position Actuator Replacement - Bank 1 (Right Side) Exhaust (First Design)  or Camshaft Position Actuator Replacement - Bank 1 (Right Side) Exhaust (Second Design) .
  2. Remove the intake camshaft position actuator bolt.
  3. Remove the right intake camshaft position actuator.
scientia non olet · About LEMON Manuals