LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Mechanical - 3.8L) >> Repair Instructions - On Vehicle >> Rotating the Engine for Service Access >> Rotation Procedure

Rotation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement .
  2. Apply the parking brake.
  3. Put the transaxle in the Neutral position.
  4. Remove the engine mount struts. Refer to Engine Front Mount Bracket Replacement  and Engine Front Mount Replacement .
    5. Fig 1: Identifying J 41131, Engine Mount Strut Bracket & Upper Radiator Support
    GM849698Courtesy of GENERAL MOTORS CORP.
  5. Install the J 41131  (2) to the engine mount strut bracket (1) and the upper radiator support (3). See Special Tools .
  6. Rotate the engine forward for component access.
scientia non olet · About LEMON Manuals