LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Mechanical - 3.8L) >> Repair Instructions - On Vehicle >> Engine Mount Strut Bracket Replacement - Upper Radiator Support >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Engine Mount Strut
    GM97613Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine mount struts from the engine mount strut brackets at the upper radiator support. Refer to Engine Mount Strut Replacement - Left Side  and/or Engine Mount Strut Replacement - Right Side .
    2. Fig 2: View Of Engine Mount Strut Bracket & Upper Radiator Support
    GM190494Courtesy of GENERAL MOTORS CORP.
  2. Remove the 4 bolts from the engine mount strut bracket to the upper radiator support.
  3. Remove the engine mount strut bracket from the upper radiator support.
scientia non olet · About LEMON Manuals