LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Mechanical - 3.8L) >> Repair Instructions - On Vehicle >> Drive Belt Replacement (L26) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Drive Belt (L26)
    GM631112Courtesy of GENERAL MOTORS CORP.
  1. Lift or rotate the drive belt tensioner using a 15 mm box end wrench on the pulley nut.
  2. Remove the drive belt.