LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Mechanical - 3.8L) >> Repair Instructions - On Vehicle >> Drive Belt Idler Pulley Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Supercharger Drive Belt
    GM327021Courtesy of GENERAL MOTORS CORP.
  1. Remove the supercharger drive belt. Refer to Drive Belt Replacement (L26) .
    2. Fig 2: Identifying Drive Belt Idler Pulley - Lower
    GM327164Courtesy of GENERAL MOTORS CORP.
  2. Remove the drive belt idler pulley bolt.
  3. Remove the drive belt idler pulley.
    4. Fig 3: Identifying Idler Pulley Bracket & Bolts
    GM327162Courtesy of GENERAL MOTORS CORP.
  4. Remove the idler pulley bracket bolts.
  5. Remove the idler pulley bracket.
scientia non olet · About LEMON Manuals