Valve Rocker Arm Cover Installation - Right Side

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Right Valve Rocker Arm Cover

Courtesy of GENERAL MOTORS CORP.

Install the valve rocker arm cover.
Apply GM P/N 12345382 (Canadian P/N 10953489) threadlocker or the equivalent to the threads.

NOTE: Refer to FASTENER NOTICE .

Install the valve rocker arm cover bolts.
Tighten: Tighten the valve rocker arm cover bolts to 10 N.m (89 lb in).