LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Mechanical - 3.8L) >> Repair Instructions - Off Vehicle >> Valve Rocker Arm Cover Cleaning and Inspection

Valve Rocker Arm Cover Cleaning and Inspection

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cleaning/Inspecting Valve Rocker Arm Cover
    GM187054Courtesy of GENERAL MOTORS CORP.
  1. Clean the valve rocker arm cover mating surface.
  2. Clean the valve rocker arm cover. Remove all the sludge and the oil deposits.
  3. Inspect the valve rocker arm cover for damage. Replace the valve rocker arm cover if any damage is found.
scientia non olet · About LEMON Manuals