LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Mechanical - 3.8L) >> Repair Instructions - Off Vehicle >> Oil Pan Removal

Oil Pan Removal

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Oil Level Sensor
    GM1646925Courtesy of GENERAL MOTORS CORP.
    NOTE: Remove the oil level sensor, located in the oil pan, before the oil pan is removed. The sensor may be damaged if the oil pan is removed first.
  1. Remove the oil level sensor.
    2. Fig 2: View Of Oil Pan & Bolts
    GM1646926Courtesy of GENERAL MOTORS CORP.
  2. Remove the oil pan bolts.
  3. Remove the oil pan using pry points between the pan and engine block if required.
  4. Remove the oil pan gasket if required.
scientia non olet · About LEMON Manuals