Oil Level Indicator and Tube Installation

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Oil Level Indicator, Tube & Nut

Courtesy of GENERAL MOTORS CORP.

Install the oil level indicator tube.
- Lubricate the O-ring with engine oil and make sure it is in place.
- Make sure the assembly is fully seated in the engine block.

NOTE: Refer to FASTENER NOTICE .

Install the oil level indicator tube nut.
Tighten: Tighten the nut to 19 N.m (14 lb ft).
Install the oil level indicator.