LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Mechanical - 3.8L) >> Repair Instructions - Off Vehicle >> Engine Front Cover Removal

Engine Front Cover Removal

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Crankshaft Position Sensor Shield
    GM35844Courtesy of GENERAL MOTORS CORP.
  1. Remove the crankshaft position sensor shield.
    2. Fig 2: Locating Crankshaft Position Sensor
    GM36589Courtesy of GENERAL MOTORS CORP.
  2. Remove the crankshaft position sensor studs.
  3. Remove the crankshaft position sensor.
    4. Fig 3: View Of Engine Front Cover
    GM35803Courtesy of GENERAL MOTORS CORP.
  4. Remove the engine front cover bolts and stud.
  5. Remove the engine front cover.
    6. Fig 4: Locating Engine Front Cover Gasket
    GM35801Courtesy of GENERAL MOTORS CORP.
  6. Remove the engine front cover gasket.
scientia non olet · About LEMON Manuals