Engine Flywheel Cleaning and Inspection
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the flywheel.
- Inspect the engine flywheel for damage and cracks.
- Inspect the engine flywheel ring gear for damaged teeth.
- Replace the flywheel if any damage is found.
IMPORTANT:
In order to maintain the proper component balance, contact surface taper and heat transfer, manual transmission flywheels are NOT to be machined.