LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Mechanical - 3.8L) >> Repair Instructions - Off Vehicle >> Cylinder Head Removal - Right Side

Cylinder Head Removal - Right Side

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Cylinder Head & Cylinder Head Bolts
    GM35842Courtesy of GENERAL MOTORS CORP.
  1. Remove the cylinder head bolts.
  2. Discard the cylinder head bolts.
  3. Remove the cylinder head.
  4. Remove the cylinder head gasket.
scientia non olet · About LEMON Manuals