LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Mechanical - 3.8L) >> Repair Instructions - Off Vehicle >> Crankshaft Front Oil Seal Installation >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Using J 35354 & Soft Faced Hammer To Install Crankshaft Front Oil Seal
    GM36662Courtesy of GENERAL MOTORS CORP.
  1. Coat the inside diameter of the crankshaft front oil seal with lubricant GM P/N 12345616 (Canadian P/N 993182) or the equivalent.
  2. Use J 35354  and a soft faced hammer to install the crankshaft front oil seal. See Special Tools .
  3. Remove J 35354  . See Special Tools .
scientia non olet · About LEMON Manuals