LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Mechanical - 3.8L) >> Repair Instructions - Off Vehicle >> Balance Shaft Removal >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Balance Shaft Driven Gear & Bolt
    GM154521Courtesy of GENERAL MOTORS CORP.
  1. Remove the balance shaft driven gear bolt.
  2. Remove the balance shaft driven gear.
    3. Fig 2: View Of Balance Shaft Retainer
    GM42237Courtesy of GENERAL MOTORS CORP.
  3. Remove the balance shaft retainer bolts.
  4. Remove the balance shaft retainer.
    5. Fig 3: View of Balance Shaft With J 6125 - 1B
    GM36705Courtesy of GENERAL MOTORS CORP.
  5. Use J 6125-1B  to remove the balance shaft. See Special Tools .
scientia non olet · About LEMON Manuals