LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Battery, Charging System And Starting System) >> Repair Instructions >> Starter Motor Replacement (LS4) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Positive & Negative Cables
    GM1552773Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (L26)  or Battery Negative Cable Disconnection and Connection (LY7)  or Battery Negative Cable Disconnection and Connection (LS4) .
  2. Remove the starter solenoid BAT terminal nut (3) and remove the positive battery cable (2) from the starter motor.
  3. Remove the engine harness terminal (4) from the starter motor.
    4. Fig 2: View Of Engine Electrical Connectors
    GM1552781Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the starter motor electrical connector (1).
  5. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
    6. Fig 3: View Of Starter Motor
    GM1552783Courtesy of GENERAL MOTORS CORP.
  6. Remove the starter motor bolts and starter motor.
scientia non olet · About LEMON Manuals