LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Heat Shield Replacement (LY7) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery. Refer to Battery Replacement (LY7)  or Battery Replacement (L26)  or Battery Replacement (LS4) .
  2. Fig 1: Aligning Battery Heat Shield Downward
    GM793744Courtesy of GENERAL MOTORS CORP.
  3. Lift the battery heat shield upward from the battery.