LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Battery, Charging System And Starting System) >> Diagnostic Information and Procedures >> DTC P0626 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON, engine running, observe the scan tool ECM GEN-F Terminal Signal parameter. The GEN-F Terminal Signal parameter should read between 5-95 percent.