LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Frame And Underbody) >> Repair Instructions >> Engine Splash Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Engine Splash Shield & Retainers
    GM317813Courtesy of GENERAL MOTORS CORP.
  1. Remove the push-in retainers that hold the ABS lead to the engine splash shield.
  2. Use the J 38778  in order to remove the push-in retainers from the engine splash shield.
    3. Fig 2: Identifying Right Engine Splash Shield & Retainers
    GM317814Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine splash shield from the lower flange of the engine compartment side rail.
scientia non olet · About LEMON Manuals