LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Door Lock Systems & Door Handles) >> Repair Instructions >> Door Locking Rod/Bellcrank Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Rear Door Locking Rod/Bellcrank
    GM1363653Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear door trim panel Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the bellcrank from the door by releasing the 2 inner retaining clips.
  3. Remove both door rods from the bellcrank.
scientia non olet · About LEMON Manuals